display fault-management alarm information

Function

The display fault-management alarm information command displays alarm registration information.

Format

display fault-management alarm information [ alarm-name ]

Parameters

Parameter	Description	Value
alarm-name	Specifies the name of an alarm.	The value is a string of 1 to 64 case-insensitive characters, spaces not supported.

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

This command is available to aid upgrade compatibility. To run this command, you must enter the complete command.

This command is replaced by the display alarm information and display event information commands.

Example

# Display registration information about the linkUp alarm.

<sysname> display fault-management alarm information linkUp

**********************************
AlarmName: linkUp
AlarmType: Resume Alarm
AlarmLevel: Indeterminate
RootAlarmName: linkDown
Match VB Name: ifIndex ifAdminStatus
**********************************

**Table 1** Description of the **display fault-management alarm information** command output
Item	Description
AlarmName	Alarm name
AlarmType	Alarm type
AlarmLevel	Alarm severity
RootAlarmName	Name of the root-cause alarm
Match VB Name	Matching contents of a pair of alarms