max-response-time (IGMP view)

Function

The max-response-time command sets the maximum response time for IGMP query messages globally.

The undo max-response-time command restores the default configuration.

Format

max-response-time interval

undo max-response-time

Parameters

Parameter	Description	Value
interval	Specifies the maximum response time for the IGMP query messages.	The value is a decimal integer that ranges from 1 to 25, in seconds.

Views

IGMP view

Default Level

2: Configuration level

Usage Guidelines

By default, the maximum response time of IGMP Query messages is 10 seconds.

The function of this command is the same as that of the igmp max-response-time used in the interface view, except for the function range. The configuration in the IGMP view is globally valid in the instance, whereas the configuration in the interface view is valid only for the current interface. The system prefers the configuration in the system view. The configuration in the IGMP view is used only when the configuration in the interface view is not done.

You must run the multicast routing-enable command to enable the multicast function before entering the IGMP view.

Example

# In the IGMP view, set the maximum response time for IGMP query messages to 8 seconds.

<sysname> system-view
[sysname] multicast routing-enable
[sysname] igmp
[sysname-igmp] max-response-time 8