Configuring an Authentication Profile

Procedure

1. Run system-view

   The system view is displayed.

2. Run authentication-profile name authentication-profile-name

   The authentication profile view is displayed.

3. Configure the user authentication mode.

   • 802.1X authentication

     Run dot1x-access-profile access-profile-name

     An 802.1X access profile is bound to the authentication profile.

     By default, no 802.1X access profile is bound to an authentication profile.

4. (Optional) Run authentication mode { multi-share | multi-authen [ max-user max-user-number ] }

   The user access mode is configured, or the maximum number of access users allowed on the interface is configured when the user access mode is multi-authen.

   By default, the user access mode is multi-authen.

5. (Optional) Run authentication ip-conflict-check enable

   The client IP address conflict detection function is enabled.

   By default, the device detects whether client IP addresses conflict with each other.

6. (Optional) Run access-domain domain-name [ force ]

   A default or forcible domain is configured for users.

   By default, no default or forcible domain is configured in an authentication profile, and the global default domain default is used.