Configuring NTP Authentication in Broadcast Mode

By configuring the authentication key ID used in the synchronization with the NTP broadcast server on the local FW, you can apply NTP authentication in broadcast mode.

Context

Do as follows on the FW that functions as an NTP broadcast server. For configuring the broadcast client, see Configuring the Broadcast Mode.

Procedure

Access the system view.
```
system-view
```
Set the interface that sends broadcast NTP packets.
```
interface interface-type interface-number
```

Specify the ID of the authentication key used by the NTP broadcast server.

ntp-service broadcast-server [ version number | [ authentication-keyid key-id | autokey ] | port port-number  ] ^*