dialer timer autodial

Function

The dialer timer autodial command configures the interval for DCC to dial automatically.

The undo dialer timer autodial command restores the default interval.

Format

dialer timer autodial seconds

undo dialer timer autodial

Parameters

Parameter	Description	Value
seconds	Specifies the interval for the call in seconds.	The value ranges from 10 to 604800 in seconds.

Views

Dialer interface view

Default Level

2: Configuration level

Usage Guidelines

Before configuring the dialer timer autodial command, run the dialer enable-circular command to enable Circular DCC.

By default, the interval for DCC to dial automatically is 30 seconds.

This command must be used along with the keyword autodial in the dialer route command. After this command is configured, DCC will automatically attempt to dial once every period of time specified by the parameter seconds until a connection is established. Auto-dial does not require packets for triggering, and it will not automatically disconnect due to idle timeout once a connection has been established. In other words, the configuration of the dialer timer idle command is invalid for it.

Example

# Set the DCC auto-dial interval on Dialer 0 to 60 seconds.

<sysname> system-view
[sysname] interface Dialer 0
[sysname-Dialer0] dialer timer autodial 60