The l2tp enable command enables the L2TP function.
The undo l2tp enable command disables the L2TP function.
By default, the L2TP function is disabled.
l2tp enable
undo l2tp enable
None
System view
2: Configuration level
The L2TP function becomes available only after you run the l2tp enable command.
If the L2TP is disabled, the L2TP function is unavailable even if L2TP parameters are specified on the FW.
# Enable the L2TP function on the FW.
<sysname> system-view [sysname] l2tp enable