lacp collector delay

Function

The lacp collector delay command configures the value of the CollectorMaxDelay field in an LACPDU.

The undo lacp collector delay command restores the default value of the CollectorMaxDelay field in an LACPDU.

The default value of the CollectorMaxDelay field is 0 in an LACPDU.

Format

lacp collector delay delay-time

undo lacp collector delay

Parameters

Parameter	Description	Value
delay-time	Specifies the value of the CollectorMaxDelay field in an LACPDU.	The value is an integer ranging from 0 to 65535, in 10 microseconds.

Views

Eth-Trunk interface view

Default Level

2: Configuration level

Usage Guidelines

Prerequisites

The mode lacp-static command has been run in the Eth-Trunk interface view to configure the Eth-Trunk interface to work in static LACP mode.

Precautions

For a Huawei device, the value of the CollectorMaxDelay field is valid from 0 to 65535. Even though the member interfaces of the same Eth-Trunk interface receive LACPDUs with different CollectorMaxDelay values, the device can process them without deteriorating its CPU performance.

Example

# Set the value of the CollectorMaxDelay field to 65535.

<sysname> system-view

[sysname] interface eth-trunk 1

[sysname-Eth-Trunk1] mode lacp-static

[sysname-Eth-Trunk1] lacp collector delay 65535