Installing a Desktop Device

Mounting a Device to a Specified Location

The USG6510E, USG6510E-POE, USG6530E can be mounted in a 19-inch standard cabinet. When no cabinet is available, install the USG6510E, USG6510E-POE, USG6530E on a workbench or a wall.

Connecting a PGND Cable

Connecting the PGND cable of a USG6510E, USG6510E-POE, USG6530E correctly is a key measure of surge protection and resistance to interference. Before using the USG6510E, USG6510E-POE, USG6530E, correctly connect the PGND cable. Otherwise, the USG may be damaged.

Installing a Micro SD Card

This section describes how to install a micro SD card for the first time to avoid damages.

Connecting a Console Cable

After connecting a PC to the console port of a USG6510E, USG6510E-POE, USG6530E with a console cable, you can use the terminal emulation program on the PC to access the command configuration interface of the USG6510E, USG6510E-POE, USG6530E.

Connecting an Ethernet Cable

Based on the network plan, you can connect one end of an Ethernet cable to the Ethernet port of a USG6510E, USG6510E-POE, USG6530E and the other end to the Ethernet port of the peer device.

Installing Optical Transceivers and Connecting Optical Fibers

This section describes how to install optical transceivers on the SFP or SFP+ ports and connect them to the ports of the peer device using optical fibers according to the network plan.

Connecting a Power Adapter

A power adapter can be used to supply power for a USG6510E, USG6510E-POE, USG6530E. Prepare an AC power cable to connect the power connector and the power source of the equipment room.

Powering On or Off the USG6510E, USG6510E-POE, USG6530E

This section describes how to power on or off the USG6510E, USG6510E-POE, USG6530E. To ensure the normal start and security of the USG6510E, USG6510E-POE, USG6530E, strictly follow the operation guide to power on or off the USG6510E, USG6510E-POE, USG6530E.